If you are looking for a detailed guide on how the Brother PE570 embroidery machine works, this comprehensive manual covers everything from wireless Artspira setup to advanced maintenance. The Brother PE570 is a dedicated 4×4 embroidery-only device featuring 135 built-in designs and seamless Wi-Fi connectivity for modern crafters.
By following this tutorial, you will master threading, hoop tension, and error code fixes to ensure professional-grade stitching on every project.
Brother PE570 Embroidery Machine: Tutorials, Setup, Troubleshooting Fixes & More
Brother PE570 Embroidery Machine: Specs and Features at a Glance
The Brother PE570 machine is an embroidery‑only, computerized machine with a 4×4 inch embroidery field and a touchscreen interface. It comes with 135 built‑in designs, over 800 fonts, and Wi‑Fi connectivity through the Artspira app, making it a strong choice for beginners and small‑scale entrepreneurs.
Here’s a quick snapshot of what you get:
- Embroidery field: approximately 4×4 inches
- Built‑in designs: 135+
- Fonts: 800+ (including multi‑line options)
- Connectivity: USB and Wi‑Fi (via Artspira app)
- Screen: Full‑color touchscreen with design preview
- Included hoop: 4×4 standard embroidery hoop
This computerized embroidery machine works well for home projects, small gifts, baby items, and small‑business embroidery like caps, T‑shirts, and tote bags.
The lack of a sewing function keeps it focused on embroidery, which is great if you already own a sewing machine or prefer to keep the two jobs separate.
Setting Up Your Brother PE570 Embroidery Machine
Getting your PE570 machine ready for its first stitch is one of the most important steps in your embroidery journey. A clean, correct setup ensures smooth threading, stable hooping, and accurate designs right from the start.
We’ll walk you through unboxing, workspace setup, powering on, and basic safety, so you can start using your Brother embroidery machine PE570 confidently and without fear of mistakes.
Unboxing and What’s In the Box
When you receive your Brother PE570 embroidery machine, the first thing to do is open the box carefully and check all the parts. Most kits include:
- The PE570 machine body
- Power cable
- Power adapter
- 4×4 embroidery hoop
- Bobbins (SA156 type)
- Needles (usually 75/11 or 80/12)
- Screwdriver, accessory bag, and small brush
- Quick‑start guide and full manual
Lay everything out on a clean table and make sure nothing is missing. If any part is damaged or missing, contact the seller or support before you start using the machine. Doing this early saves time and avoids issues later when you’re in the middle of a project.
Choosing the Right Workspace
Your embroidery machine needs a strong, stable surface that won’t move or vibrate during stitching. The Brother PE570 embroidery machine is not heavy, but it still needs a solid base.
Tips for a good workspace:
- Use a dedicated table or embroidery table, not a wobbly chair or soft bed.
- Keep the power socket close and avoid long, tangled cords.
- Place the machine at eye level or slightly below so you can easily see the screen and hoop.
- Keep the area clean and dust‑free to protect the machine and thread.
If you share the space with kids or pets, consider placing the machine on a higher shelf or using a cover when not in use. This simple step helps protect your Brother PE570 embroidery machine and keeps it in good condition for years.
Powering On and Basic Safety Checks
Before you plug in the Brother embroidery machine PE570, read the safety notes in the manual. These are not just for lawyers; they really help you avoid damage to the machine and injury to yourself.
Steps to safely power on:
- Plug the power cable into the machine and the wall socket.
- Switch on the Brother PE570 embroidery machine using the power button on the side or back.
- Wait for the screen to light up and show the home menu.
- Check that the machine arm moves smoothly when you gently turn it by hand (with the machine off).
Safety points to remember:
- Don’t run the machine unattended for long periods, especially when you’re testing a new design.
- Keep loose hair, jewelry, and clothing away from the moving arm and needle area.
These small habits make a big difference in how long your Brother PE570 embroidery machine lasts and how safe your workspace feels.
Attaching the Embroidery Hoop Correctly
The 4×4 embroidery hoop is the bridge between your fabric and the machine. If it’s not attached correctly, your designs will be crooked or off‑center.
How to attach the hoop:
- Place the inner hoop (the smaller ring) on the machine’s arm, aligning the notches.
- Slide the outer hoop over it and tighten the screw until the hoop is firm, but not too tight.
- Test the hoop by gently moving the arm back and forth; it should feel stable and not wobble.
If the hoop feels loose, re‑tighten the screw. If it feels stuck, slightly loosen it and realign the notches. A properly attached hoop gives you a clean, centered design every time you use the Brother PE570 embroidery machine.
Mastering the Tech: Artspira App and Wireless Connectivity
The “Wireless Lan” feature is the standout upgrade of this model compared to older versions. It removes the need for tangled cables and allows for a much more fluid creative workflow from your smartphone to the machine.
How to Connect Your Brother PE570 Computerized Embroidery Machine to Wi-Fi?
To get your Brother PE570 embroidery machine online, navigate to the settings menu on the color LCD screen and locate the “Wireless LAN Setup Wizard.”
Select your home network and enter your password; once connected, the Wi-Fi icon on the screen will turn blue. This connection is the bridge that allows you to use the Artspira app and receive firmware updates directly from Brother.
Transferring Designs Without a USB: Artspira Workflow
The Artspira app is a game-changer for the Brother PE570 embroidery machine, offering a variety of free designs and basic drawing tools.
Once you create or select a design in the app, you simply tap “Transfer” to send the data wirelessly to your machine. The machine will beep to notify you that the data has been received, and the design will appear on your screen, ready for hooping.
File Formats Explained: Using .PES vs .DST Files
While the Brother PE570 embroidery machine is compatible with several formats, .PES is the native format that carries the most data, including thread color information.
If you need special files like an applique digitizing service, we can provide those for you in the exact format this machine needs for the best results. Our team can also help you with file conversion if your design is not in the right format yet.
If you are downloading designs from third-party sites, always choose .PES for the best results. The machine can read .DST files, but these are industrial formats that may not retain the specific color stops, requiring you to manually monitor the machine during color changes.
Solving the “4×4 Limit” Of PE570 Machine: Tips for Larger Designs
One of the first things you will notice about your Brother PE570 embroidery machine is the 4×4 inch hoop. While this size is perfect for pockets, baby clothes, and hats, you might eventually want to make a larger design for the back of a jacket or a large pillow.
Don’t worry, you don’t need to buy a bigger machine! Here is how to create larger art using easy methods.
Use a Multi-Position Hoop
The easiest way to go bigger without a new machine is to buy a “Multi-Position Hoop.” This is a special hoop that is longer than the standard one (usually 4×7 or 4×12 inches). It has extra attachment clips on the side.
How it works:
- You clip the hoop into the first position and stitch the top part of your design.
- The machine stops, and you move the hoop to the second set of clips.
- You stitch the next part of the design. The Brother PE570 embroidery machine thinks it is still doing a 4×4 design, but because you moved the hoop, the two designs sit perfectly next to each other to make one big image.
Split Your Designs with Software
If you have a large picture you want to stitch, you can use “Splitting Software” on your computer. Programs like Embrilliance Essentials or the free Embroidery Tool Shed can take a big design and cut it into two or three 4×4 pieces for you.
Steps to follow:
- Load the big file: Open your large design in the software.
- Select your hoop: Choose the 4×4 hoop setting for the Brother PE570 embroidery machine.
- Auto-Split: Click the split button. The software will save the design as “Part A” and “Part B.”
- Stitch and Re-hoop: Stitch Part A, then take the fabric out, line it up using the software’s “alignment marks,” and stitch Part B.
Use Built-in “Layout” Tools
Your Brother PE570 embroidery machine has a screen that lets you move designs around. If you want to put a name under a flower, you don’t have to do them at the same time.
- Stitch the flower first.
- Use the touch screen to move your next design (the name) to a different spot in the hoop.
- This is a great way to fill up every inch of your 4×4 space without needing fancy computer skills.
How to Use The Brother PE570 Touchscreen?
Using the screen on the Brother PE570 embroidery machine is easy once you know a few simple steps. The screen helps you choose designs, change size, move the design, and start stitching. In this part, you will learn how to use the screen and do your first small stitch on the PE570 in very easy steps.
How To Use The Main Screen?
When you turn on the machine, you will see the Main Screen. This is the first screen you see. On this screen, you can choose to sew, embroider, see settings, or check machine info.
To start embroidery, touch the Embroidery option on the screen of the Brother PE570 embroidery machine. Now you will see a list of designs. The screen may show small pictures of each design. You can move up and down the list with your finger or the arrow buttons on the side of the machine. This is how you find the design you want.
How To Choose A Design?
To choose a design, just touch the design you like on the screen. The Brother PE570 embroidery machine will show the design bigger so you can see it clearly. It may also show the size and how many colors it has.
If the design is too big for the 4×4 hoop, the machine will show a message like “Design too big” or “Out of frame.” In that case, you can:
- Pick a smaller design, or
- Make this design smaller by using the Size option.
To change size, touch the Size button and choose a smaller number. After you change the size, check the preview again. If the text looks blurry or too small, make it a little bigger or choose a different design.
How To Resize, Turn, And Move The Design?
Before you start stitching, you may want to change how the design sits in the hoop. The Brother PE570 embroidery machine lets you do this in three easy ways.
- Resize: Touch the Size or Scale button and lower the number so the design fits inside the 4×4 hoop area on the screen.
- Turn (rotate): Touch the Rotate button and turn the design left or right so it fits the cap, towel, or T‑shirt.
- Move: Touch the Move button and drag the design with your finger to the right place in the hoop (top‑center, left‑center, etc.).
Always look at the screen preview after you change anything. If the design looks squished or very tiny, change it back and try again. A design that looks good on the screen usually stitches nicely on the fabric.
Understanding the Brother PE570 Price
When you look at the Brother PE570 embroidery machine price, you might wonder if it is a good deal. This machine is built for beginners, but it has fancy features like Wi-Fi that usually cost a lot more. Here is a simple guide to what you will spend and what you get for your money.
How Much Does it Cost?
The Brother machine usually costs between $400 and $550. The price can change depending on where you shop. Large stores like Amazon often have the lowest prices, but local sewing shops might give you free thread or a quick lesson when you buy from them.
If you see a Brother embroidery machine that looks similar but is much cheaper, check the model number. Older machines don’t have Wi-Fi. Many people think the Brother PE570 is worth the extra money because you can send designs from your phone using the Artspira app. It saves you the trouble of using cables or USB sticks.
Is the PE570 Brother Machine Worth the Money?
To see if this Brother PE570 embroidery machine is a good buy, think about these points:
- Free Designs: It comes with 135 designs already inside. You don’t have to buy extra art to start your first project.
- Easy to Use: The color touch screen is very simple. It is like using a small tablet, which makes it feel modern and worth the price.
- One Job Only: Remember, this is not a Brother PE570 sewing and embroidery machine. It cannot sew a straight line for a hem or fix a hole in your jeans. It only does embroidery. If you want a machine that does both, you will have to spend more money.
Overall, the Brother PE570 machine is a great investment for someone starting a hobby or a small home business. It is reliable and easy to learn.
Threading And Bobbin Basics For The Brother PE570 Embroidery Machine
Threading the Brother embroidery machine the right way helps you avoid thread breaks, jams, and messy stitches. If you are new to machines, this is easy to learn when you go step by step. At the same time, winding and putting in the bobbin correctly will help your Brother PE570 run smoothly and quietly.
Think of it like “feeding the machine” from the top and the bottom. When both threads move easily and with the right tension, your embroidery will look clean and nice.
How To Thread The Top Thread On The Brother PE570 Embroidery Machine?
To thread the top thread on the Brother machine, just follow the numbered path in order by using this simple method:
- Put the thread spool on the spool pin on top of the machine.
- Pull the thread through the thread guide on top (this is usually a small ring).
- Bring the thread down to the tension discs and slide it between the two metal plates.
- Pull the thread up to the take‑up lever (the big metal arm that moves up and down) and put the thread through the slit.
- Bring the thread back down and pass it through the needle‑threading guide near the needle.
- Put the thread into the needle from front to back, then pull a few inches through so it does not slip out.
If your PE570 Brother embroidery machine has an automatic needle threader, use it here. After you pass the thread through the guide, press the auto threader button, and it will finish the last step for you. If it does not work the first time, unthread, straighten the thread, and try again.
Pro Tip: Use a bright-colored thread for your first try so you can see where the thread is going if something goes wrong.
How To Wind The Bobbin For The Brother PE570 Embroidery Machine?
The bobbin holds the bottom thread that comes from under the fabric. Winding it correctly will help you avoid thread jams and tension issues on the Brother embroidery machine.
Steps to follow:
- Take an empty bobbin and slide it onto the bobbin winder shaft on the top of the machine.
- Push the shaft to the right until it clicks into the winder position.
- Pull the thread from the spool through the small bobbin‑winding guide (usually on the left side).
- Wrap the thread around the bobbin a few times by hand so it does not slip off when it starts.
- Grip the end of the thread and push the start button or press the foot pedal to begin.
- Let the bobbin wind until it is full. The machine will slow down or stop when it is ready.
- Snip the thread close to the spool, take out the bobbin, and push the metal bar back to its regular spot.
Always keep the bobbin not too tight, so the thread can feed easily while stitching. If the bobbin is over‑wound, it may bulge and create tension problems. A gently filled bobbin makes the Brother PE570 embroidery machine run more smoothly.
How To Insert The Bobbin Into The PE570 Brother Embroidery Machine?
Once the bobbin is filled, you need to put it into the machine. The right direction matters for clean stitching.
Here is how:
- Open the bobbin case by sliding the small latch or door near the needle area.
- Hold the bobbin so the thread unwinds clockwise as you look at the side.
- Place the bobbin into the case and pull the thread through the small slot on the left side toward the tension spring.
- Gently pull the thread to feel the tension; it should give a little but not break.
- Close the bobbin case and make sure it clicks or fits snugly.
When you start the machine, the bobbin thread will come up through the hole and join with the top thread. If you put the bobbin in the wrong way, the thread will not feed correctly, and you may see loops or broken stitches.
Fabric Hooping And Stabilizer Guide
Hooping the fabric and using the right stabilizer is very important for good embroidery on the Brother PE570 embroidery machine. If the fabric moves or the stabilizer is wrong, the design can look wrinkled, messy, or not in the right place.
In this section, you will learn how to hoop fabric in a very easy way and which stabilizer to use for different types of fabric.
What Is Stabilizer And Why You Need It?
A stabilizer is a thin sheet that you put under (and sometimes over) the fabric while embroidering. It helps the fabric stay flat and not move or stretch when the machine is stitching.
For the Brother PE570 embroidery machine, the stabilizer makes the design look clean and smooth.
There are a few easy types of stabilizers:
- Tear‑away stabilizer: You can tear it off after stitching. Good for normal T‑shirts and cotton bags.
- Cut‑away stabilizer: You cut it around the design. Good for stretchy fabrics like baby clothes or knits.
- Wash‑away stabilizer: You can wash it away with water. Good for soft, delicate fabrics.
- No‑show mesh stabilizer: It stays under the design, but you cannot see it. Good for caps and hats.
Always choose the stabilizer that matches your fabric type and project.
How To Hoop Flat Fabric (T‑Shirts, Bags, Towels)?
Hooping flat fabric like T‑shirts, tote bags, or kitchen towels is easy if you follow these simple steps:
- Cut a piece of stabilizer, so it is slightly larger than the design you want to stitch.
- Place the stabilizer underneath your fabric in the spot where the design will go.
- Put both the fabric and the stabilizer together between the two parts of the hoop.
- Gently pull the edges of the fabric so it is smooth, but do not pull too hard.
- Turn the screw on the hoop until the fabric is held firmly and cannot slip out.
The fabric should be smooth and flat, but don’t pull it as tight as a drum. If it’s too loose, it will wrinkle; if it’s too tight, the fabric will stretch and look bad. Once it is ready, snap the hoop onto your Brother PE570 embroidery machine and make sure it is locked tight and does not wobble.
How To Hoop Stretchy Fabrics (Baby Onesies, Socks, Knits)?
Stretchy fabrics like baby onesies, socks, and soft T‑shirts can stretch very easily, so they need special care during hooping.
Easy tips for stretchy fabrics:
- Use a cut‑away stabilizer under the fabric so it does not stretch.
- You can add a light tear‑away on top for extra support.
- Hoop the fabric gently; do not pull it too tight.
- Use a small, simple design to reduce stress on the fabric.
Always test on a small scrap piece first. If the design looks smooth and flat, you can use the same setup for the real project on the Brother PE570 embroidery machine.
How To Hoop Caps And Hats?
Caps and hats are curved, so you need a special cap hoop (also called a hat hoop) to hold the cap in place while stitching.
Simple steps to hoop a cap:
- Put the cap hoop together and slide the front of the cap into the hoop.
- Gently pull the cap fabric so it is smooth in the hoop.
- Tighten the screw so the cap is firm but not too tight.
- Make sure the peak or bill of the cap is not under the needle area.
Use a light cut‑away stabilizer for the cap so it does not feel stiff. Avoid very big or very dense designs on the front bill, or the cap may feel heavy and uncomfortable.
How To Hoop Thick Or Fluffy Fabrics (Towels, Robes)?
Towels and bathrobes are thick and soft, so the stitches can go deep into the fabric and look small or messy if you are not careful.
Tips for thick fabrics:
- Use a heavy cut‑away stabilizer or two layers of stabilizer under the fabric.
- You can put a topping (like a clear film) on top of the towel to stop the stitches from sinking.
- Use a simple design with light fill; avoid very small text or heavy fills.
Always test on a small piece of the same towel first. This helps you see how the design looks and if you need to change the stabilizer or hoop tightness on the Brother PE570 embroidery machine.
Troubleshooting Fixes: Common PE570 Problems and Solutions
Even a smart computerized embroidery machine can have bad days. While most guides talk about simple things like broken needles, the PE570 Brother embroidery machine has three specific problems that happen because of its high-tech features. Here is how to fix them in plain English.
1. The Artspira App Won’t Send My Design
The Brother PE570 embroidery machine is famous for being wireless. But sometimes, you try to send a picture from the Artspira app, and you get an “Error” or “Timeout” message. This means the computer in the machine and the app on your phone stopped talking to each other.
How to Fix It:
- Keep them close: Make sure your phone and your Brother embroidery machine PE570 are right next to each other when you hit “send.”
- Don’t use huge designs: If a design has too many tiny stitches (more than 50,000), the machine will say “no.” Try a smaller or simpler design.
- Restart the Wi-Fi: Turn the machine’s Wi-Fi off and then back on in the settings menu. It’s like restarting your phone when it acts glitchy.
2. The “F04” Error (Motor Lock)
If your Brother PE570 embroidery machine suddenly stops and shows “F04,” it means something is stuck. The machine is “locking” itself, so the motor doesn’t burn out. This is usually caused by a “bird’s nest”, a big clump of tangled thread hidden under the needle.
How to Fix It:
- Clean the bottom: Take out the plastic bobbin and the metal plate. Look for tiny pieces of thread or a broken needle tip. Even a tiny piece of fluff can cause this error.
- Turn the wheel by hand: With the machine off, slowly turn the handwheel toward you. If it feels stiff, there is still a thread stuck inside.
- Check the top: Make sure the thread isn’t wrapped around the moving silver bar (the take-up lever) inside the machine.
3. The “Check Thread” Warning (When Nothing is Broken)
Sometimes the PE570 Brother embroidery machine keeps beeping and saying “Check Thread,” but you look, and the thread is perfectly fine. This usually happens because a tiny piece of dust is “blinding” the machine’s sensors.
How to Fix It:
- The “Floss” Trick: Take a piece of clean thread or dental floss and slide it back and forth through the top path where the thread goes. This knocks out tiny bits of lint that are blocking the sensor.
- Use the right cap: Make sure the plastic cap holding your spool of thread isn’t too big or too small. If the thread snags even for a second, the machine thinks it broke.
- Check your bobbin: Make sure you are using the official Brother embroidery machine bobbins (size SA156). If the bobbin is the wrong size, it wobbles, and the sensor gets confused.
Maintenance And Care For Longevity of the Brother PE570
Taking care of your Brother PE570 embroidery machine every day helps it stay smooth, fast, and problem‑free for many years. Here are simple, easy tips you can follow in very easy English:
- Always turn off the machine and unplug it when you are not using it for a long time.
- Keep the machine clean from dust, thread pieces, and lint, especially around the needle and hoop area.
- Use a small soft brush or cloth to gently clean the thread path and the bobbin area after each use.
- Do not allow water or drinks near the machine; keep the area dry and safe.
- Use the correct needle size and type for your fabric (like 75/11 or 80/12 embroidery needle).
- Change the needle regularly, especially if you see skipped stitches or broken thread.
- Always use good‑quality embroidery thread and avoid very cheap or old thread.
- Make sure the hoop is attached tightly, and the fabric is smooth, not too loose or too tight.
- Every few days, quickly check that the machine arm moves smoothly and the screen works correctly.
- If you see strange noises, loose parts, or the Brother PE570 embroidery machine stops working properly, stop using it and contact a service center.
- Cover the machine with a clean cloth or cover it when you are not using it to protect it from dust.
- Do not force the machine into the hoop or move the arm by hand while the machine is on.
- Follow the small maintenance steps in the manual, like light oiling, if the manual says it is safe.
By doing these simple steps, your Brother machine will work better, last longer, and give you clean, beautiful embroidery every time.
Brother PE570 vs Other Brother Embroidery Machines
If you are trying to choose between different models, it helps to see how the Brother PE570 embroidery machine compares to its siblings. While many of these machines look similar, the main differences are usually the hoop size and whether or not they have Wi-Fi.
Feature | Brother PE570 | Brother PE535 | Brother PE800 | Brother SE700 |
Machine Type | Embroidery Only | Embroidery Only | Embroidery Only | Sewing & Embroidery |
Hoop Size | 4″ x 4″ | 4″ x 4″ | 5″ x 7″ | 4″ x 4″ |
Wi-Fi / Artspira | Yes | No | No | Yes |
Built-in Designs | 135 | 80 | 138 | 135 |
Screen Type | Color Touch | Color Touch | Color Touch | Color Touch |
Best For | Tech-savvy beginners | Budget hobbyists | Large designs | All-in-one crafters |
What Are The Setup Essentials And Accessories of the Brother PE570?
When you start using the Brother PE570 machine, you need a few basic items and accessories to make your work easy, fast, and clean. These are the things you should have ready before you start your first project.
- Power cable and adapter – To plug in and turn on the Brother PE570 embroidery machine.
- 4×4 embroidery hoop – This comes with the machine and is needed to hold the fabric in place.
- Needles (embroidery 75/11 and 80/12) – Keep a few extra needles so you can change them when they get dull or break.
- Bobbins (SA156 type) – The machine needs bobbins for the bottom thread; keep a small set ready.
- Embroidery thread – Good‑quality rayon or polyester thread in basic colors (white, black, red, blue, etc.).
- Stabilizers (tear‑away, cut‑away, and wash‑away) – Different stabilizers for different fabrics like T‑shirts, baby clothes, and caps.
- Scissors and small thread snips – For cutting threads and trimming loose ends after stitching.
- Small brush or soft cloth – To clean lint and dust from the needle and bobbin area.
- Simple screwdriver (if needed) – For small screw adjustments on the hoop or machine.
- USB flash drive – To carry and load designs from your computer to the Brother PE570 embroidery machine.
- Extra fabric and scrap pieces – For testing designs, colors, and tension before starting real projects.
- Clear ruler or template sheet – To measure the design size and place it correctly on caps, bags, or shirts.
Having these setup essentials and accessories ready will help you use the PE570 machine smoothly every day without stopping to search for missing parts.
Final Thoughts
This Brother PE570 embroidery machine reviews shows the machine is a great deal; the price of “bad” designs can add up quickly. If you download a cheap or poorly made file, it can jam your machine or ruin your expensive fabric. This is why professional embroidery digitizing is important for the best results, because a good file saves you money by not wasting your thread or your time.
ZDigitizing provides professional embroidery digitizing services to help you get the most out of your machine and is a leading zdigitizng provide online embroidery digitizing service provider in UK, USA, and worldwide.
With over 10+ years of experience, our expert digitizing team knows exactly how to make a design work perfectly on a 4×4 hoop for the Brother PE570 embroidery machine. We offer a 24/7 working team and 24/7 customer support to help you whenever you need it.
Our quality is guaranteed because we make sure every stitch looks perfect, and we even provide a preview before you pay. If you need any small changes, minor edits are free of charge. Our prices are already lower than those of other online shops, and we offer 50% OFF on your first order to get you started.
Want to save money and get the best results? Visit ZDigitizing to place your first order and get 50% OFF!
