The Ricoma mt-2002-8S is the newest and amazing embroidery machine technology manufactured by Ricoma. Designed with a bigger sewing area, smaller sewing arm, twenty needles and two heads, the MT could embroider big colorful designs on both small and heavy items. It is also equipped with a new advanced 8” high-definition LCD Touchscreen panel.
However, there are some problems you might face during embroidery. Let’s discuss those.
Ricoma Mt-2002-8S Embroidery Machine Problems:
1. Why You Are Getting An X Or Y Limit Error, And How To Correct It – Common Problems Ricoma Machine.
You are getting this error because your logo might be very huge for the hoop, or you are trying to stitch out the preset hoop margin. You can either use a large hoop or move the logo around so you stay within the boundaries of the hoop.
2. Why Can Not Upload A New Design?
You have to remove the embroidery status before uploading a new design. The status of embroidery (the lock icon in the panel) is the tool that sets the machine in and out of embroidery mode.
The status of the embroidery icon could be found on the right corner of the screen and must be unlocked to access some of the machine’s features. Another cause you might not be capable of importing a design is if the USB you are using has excessive memory. We suggest using a USB drive with 8GB or less.
3. Why Did I Get A Pinch On My Fabric?
This is because of a hooping error. You have to create the right tension by ensuring that the hooping is tight and the material is not creased. Be specific not to stretch the fabric, as this could damage the design. You might need a firm stabilizer.
4. Why Are My Needles Breaking On Hats?
The needle might be worn out. Structured hats have thick cardboard or plastic in the center, which could break the needle. When sewing caps, ensure the bill of the cap is as flat as possible. It is as well extremely significant to pay attention to the digitized logo. You must be aware of which logos might be utilized for different materials. The way the DST was made might not be appropriate for hats. Also, the hooping might not be correct.
5. Why Do Needles Keep Breaking?
The cause of needle breaking is:
- The needle is bent, worn out, or old
- The design might have a lot of stitches for the area
- You might have hit a hoop
- Hooping was not smooth or tight
- The material is very thick for the kind of need
6. How Do I Know If The Tension Is Right? Is There Any Default Setting?
There is no such default setting on the machine at the same time. If the problem is on a single needle, you can start by pulling the thread and feeling its tension. It must not be very tight or very loose.
Check the needles that are operating rightly and try to mimic their tension. As you pull, you must be capable of feeling when the problem needle has reached a similar tension as the needles that are working well.
Once you believe you have attained a good standard tension, try an H or I test during the middle and one-third of the top thread on both sides. Usually, if you have one-third of the bobbin thread in the center and one-third of top thread on both sides. Usually, if you have fairly given columns, your tension must be correct.
7. Why Am I Getting Thread Breaks?
Common causes of thread breaks are:
- The needle could be worn out if you have been using it for a very long time or on thick fabrics.
- Your machine might not be threaded correctly. Check the thread passage to ensure all the threads are positioned correctly.
- Threads might be too old or damaged
- Prolonged exposure to light, heat, and air could make your thread weak. You can prevent this by storing thread in a dark and cool place.
- Hooping might not be tight enough
- The tension might be very tight or very loose
8. Why Are My Stitches Looping?
Looping stitches could be the outcome of incorrect threading. Ensure the top and bobbin threads are rightly threaded. If the machine is threaded rightly, check the thread tension. Plus, ensure to check the needle. A bent, old, or loose needle would cause looping and other embroidery issues.
These were the simple steps for Ricoma MT-2002-8S common problems & solution and troubleshooting Ricoma MT-2002-8S embroidery machine. Now that you very well know how to troubleshoot Ricoma MT-2002-8S embroidery issues, it is time to start embroidering. Good luck!
Winding up with offer:
We hope this article will be helpful for you. If you want to digitize embroidery design you would need a professional like ZDigitizing, as digitizing is a complex process.
Zdigitizing is a digitizing embroidery company that provides complete digitizing and vector art services all over the world to businesses, industries, and corporations. Zdigitizing provides high-class, durable, and reasonable custom digitizing embroidery and vector art services. We have been delivering top-notch digitizing embroidery services for 20+ years.
So, if you need a digitizing or vector art service for your embroidery machine, with a super-fast turnaround and excellent quality, ZD will be your best choice. Just click the link below and get a free quote in less than 5 minutes. We offer 50% off on all our services to our potential customers on their first order.
Hope it will be helpful for you guys!
If there’s any question related to this article you can simply ask in the comment section and don’t forget to share with those you think might be helpful for them.
And finally, thanks for reading!
Frequently Asked Questions
You are getting this error because your logo might be very huge for the hoop, or you are trying to stitch out the preset hoop margin. You can either use a large hoop or move the logo around so you stay within the boundaries of the hoop.
You have to remove the embroidery status before uploading a new design. The status of embroidery (the lock icon in the panel) is the tool that sets the machine in and out of embroidery mode.
The status of the embroidery icon could be found on the right corner of the screen and must be unlocked to access some of the machine’s features. Another cause you might not be capable of importing a design is if the USB you are using has excessive memory. We suggest using a USB drive with 8GB or less.
This is because of a hooping error. You have to create the right tension by ensuring that the hooping is tight and the material is not creased. Be specific not to stretch the fabric, as this could damage the design. You might need a firm stabilizer.
The needle might be worn out. Structured hats have thick cardboard or plastic in the center, which could break the needle. When sewing caps, ensure the bill of the cap is as flat as possible. It is also extremely significant to pay attention to the digitized logo. You must be aware of which logos might be utilized for different materials. The way the DST was made might not be appropriate for hats. Also, the hooping might not be correct.
The cause of needle breaking is:
- The needle is bent, worn out, or old
- The design might have a lot of stitches for the area
- You might have hit a hoop
- Hooping was not smooth or tight
- The material is very thick for the kind of need
There is no such default setting on the machine at the same time. If the problem is on a single needle, you can start by pulling the thread and feeling its tension. It must not be very tight or very loose.
Check the needles that are operating rightly and try to mimic their tension. As you pull, you must be capable of feeling when the problem needle has reached a similar tension as the needles that are working well.
Once you believe you have attained a good standard tension, try an H or I test during the middle and one-third of the top thread on both sides. Usually, if you have one-third of the bobbin thread in the center and one-third of top thread on both sides. Usually, if you have fairly given columns, your tension must be correct.
Common causes of thread breaks are:
- The needle could be worn out if you have been using it for a very long time or on thick fabrics.
- Your machine might not be threaded correctly. Check the thread passage to ensure all the threads are positioned correctly.
- Threads might be too old or damaged
- Prolonged exposure to light, heat, and air could make your thread weak. You can prevent this by storing thread in a dark and cool place.
- Hooping might not be tight enough
- The tension might be very tight or very loose
